Byrd Tool Shelix cutterhead for Dewalt planer DW735

Description

Cutterhead diameter is 0.088" (roughly 1/16 in) smaller than the original OEM head to allow for installation without removing the carbide inserts.
C3 carbide cutters lasts an average of 10 times longer per side (4 sides = 40x) than traditional steel knives.
Spiraled to break up chips for dust collection, shear to give clean cutting action
True helical cut (slices the wood) which greatly reduces noise and tearout
Pocket for cutters makes replacing them easy and creates perfect alignment
The overall cutterhead diameter is 0.088" (roughly 1/16 in) smaller than the original OEM head to allow for installation without removing the carbide inserts. The ORIGINAL SHEar & heLIX and spiral cutter non-grind design. Woodworkers know that a shear cut is far better than a straight cut. You also know that a stagger cut is much better than just a single straight knife and is a lot easier on your dust collection system. If you just happen to plane a nail or staple, it is not necessary to replace expensive knives the full length of your planer head. Replace 2 or 3 small inexpensive knives and you are ready to go. The SHELEX is extremely quiet compared to other blades.
eBay store powered by Shopping Feed.