Dewalt DW735 Planer with all the goodies, including a Byrd Shelix cutterhead!

Description

Dewalt DW735 Planer with all the goodies, including a Byrd Shelix cutterhead!. Condition is "Used".
Available for bidding is a lightly-used tricked-out Dewalt DW735 benchtop planer. This has been a hobbyest machine, lightly used over several years. It has just about everything you could add as an accessory! In addition to the planer itself are these extras:
Dewalt entry and exit steel shelves
Dewalt stand with mobile base and shelf
Black plastic 90 degree elbow converting to 4" diameter
Wixley digital read-out for ultra precise planings
Byrd Tool Shelix cutterhead engineered just for this model planer
The specifications for this planer are:
Depth capacity 6 inches
Maximum depth of cut 1/8 inch
15 amp motor
10,000 rpm cutter speed
2 speed transmission
Sturdy 4 threaded post design with chain to raise and lower the cutterhead
Automatic carriage lock
Fan-assisted chip ejection
Very sturdy cast aluminum base
Material removal gauge and extra-large thickness scale
Extra large turret depth stop allows return to most frequently used thickness with ease
The Byrd Shelix cutterhead was installed when I bought this machine new. On this cutterhead are many four-sided solid carbide cutters, each of which can be loosened and turned to expose a fresh new cutting edge. On this machine the original settings all remain. I have never had to change the cutters, and they are still sharp on the initial side. So, three fresh cutting sides remain on all of the carbide cutters. This optional cutterhead cost me almost 0.00 alone, and was well worth it.
These Byrd Shelix cutterheads give an amazingly smooth surface cut, with less tear-out than conventional blades.
The many controls on this machine make it easy to make precise cuts and end up exactly at the thickness you desire.
I have used the planer with an Oneida dust collector and a 4 inch flexible exhaust hose. This worked perfectly with the on-board chip ejection fan.
The metal shelves make it easier to feed stock into the machine and retrieve it on the back end.
Two shiny metal pieces on the top allow you to slide/return a piece to the front for further planing.
This machine is in excellent condition. I bought it with the Wixley digital gauge, which as it turns out I have never used, as I use a calipers to measure for the final thickness of my planed piece.
All great projects begin with properly milled lumber. Up your game with this great machine!