Fuel&Oil Pressure Mechanical Gauge Test Tool Kit For Ford Powerstroke 6.0L&7.3L

Description

Description:
The set is a tool, primarily designed to test fuel pressure while driving.
The tool can test fuel or low side oil pressure.
The set is essential to see the pressure drop with a load on the engine.
It comes with all the fittings needed for both 6.0 & 7.3 engines.
100% brand new, Never been tried or installed
Professional installation is highly recommended (No instructions included)
Materials:
Fuel&Oil Pressure Mechanical Gauge Test Tool Kit For Ford Powerstroke 6.0L&7.3L
Description:
The set is a tool, primarily designed to test fuel pressure while driving.
The tool can test fuel or low side oil pressure.
The set is essential to see the pressure drop with a load on the engine.
It comes with all the fittings needed for both 6.0 & 7.3 engines.
100% brand new, Never been tried or installed
Professional installation is highly recommended (No instructions included)
Materials:
100 psi liquid filled gauge- (High quality stainless steel body with shatter-resistant rubber casing)
300 PSI rated fuel & oil hose
Lever action suction cup for securing the gauge and easier reading;
Needed JIC fittings/adapters.
Application Details:
To test Fuel pressure on a 6.0, use an allen wrench removing the plug located at the bottom front of the fuel filter housing and then install the 1/4" jic x M12-1.5 adapter.
To test oil pressure on a 6.0, please remove the "single wire", oil pressure sensor, and utilize that port with the 1/4" jic x #4 orb adapter. (Sensor is located on top of the oil cooler housing in front of the turbo)
For 7.3 fuel pressure test, there's 2 plugs on the back of the fuel filter housing. Upper driver side is the pre-filter port. Lower passenger side is the post filter port. (Most people use the pre-filter port because its easier to reach) Then you would install the 1/4" jic x #4 orb adapter.
For 7.3 oil pressure test, you have 2 options. You can remove the "single wire", oil pressure sensor located on top front of engine, and then install the 1/4" jic x #4 orb adapter. Or, you can remove 1/8" npt plug located at the oil filter head and then install the 1/4" jic x 1/8" npt adapter.
This tool may probably work on many other engines, including gas engines. If the engine has a 7/16-20 thread test port at the fuel rail, just remove the shrader valve before connecting the tool.
Notes:
After any fuel pressure test, you may leave the adapter installed and cap it with the provided JIC cap. The JIC plug is used to block off the end of the tool for storage.
Any questions please contact us via eBay and we'd love to help you out.
Package including:
Assembled pressure test hose and gauge set
Needed fittings/adapters
As shown in the Picture
Payment
We accept eBay payment and other payments through eBay payment
Shipping
Items will be shipped within 1 business days after your payment is cleared.
All Customer's items will be shipped from our CA or NJ warehourse
Import duties, taxes and charges are not included in the item price or shipping charges
International orders may take 1~3 weeks to arrive
Returns
You can return your
unused items back for exchange or refund within 60 days
.
Please contact us for return process before you return the item.
Customer service
Please feel free to contact us by ebay message if you have any questions, our customer service will reply within one business day.
Our Store
Main Products
Promotion Items
Shop Category
Store Home
Exhaust Systems
◈  Exhaust Manifolds & Headers
◈  Exhaust Pipes & Tips
◈  Exhaust Tips
◈  Mufflers
◈  V Clamps
◈  Turbo Chargers & Parts
◈  Exhaust Wraps
◈  Exhaust cutout
Intake Systems
◈  EGR Valves & Parts
◈  Air Intake Systems
◈  Cylinder Heads & Parts
Timing Components
◈  Timing Chain Kit
◈  Timing Belt Water Pump Kit
◈  Control Solenoid Valve
Suspension & Steering
◈  Shocks & Struts
◈  Coil Springs
◈  Lift Kits & Parts
Chassis Parts
◈  Control Arms & Parts
◈  Control Arms & Parts-OEM
◈  Control Arms
◈  Sway Bars
◈  Caster/Camber Kits
Engines & Components
◈  Motor Mounts
Cooling Systems
◈  Fans & Kits
◈  Radiators & Parts
◈  Intercooler Piping Kit
Exterior
◈  Grilles
◈  Hoods
Brakes & Brake Parts
◈  Air Dryers
Interior
◈  Locks & Hardware
Automotive Repair Kits
◈  Other Automotive Tools & Suppl
◈  Diagnostic Service Tools
Other Parts
◈  Go Kart Parts
◈  Connectors & Terminals
Lighting & Lamps
◈  Xenon Lights
Gaskets
◈  Cyl. Head & Valve Cover Gasket
Hangers, Clamps & Flanges
◈  T Clamps
◈  Narrow Clamps
◈  Step Clamps
Transmission & Drivetrain
◈  Universal Joints & Driveshafts
Air Intake & Fuel Delivery
◈  Fuel Inject. Controls & Parts
Turbos, Nitrous, Superchargers
◈  Turbo Chargers & Parts
◈  Turbo Chargers Rebuild Kit
Fuel oil line & fitting
◈  Fuel oil line
◈  Fuel oil fitting
Other
Hot Item
Forged/Front 1-3" Leveling Kit W/ Shock Extender Fits GMC Chevy 2500 3500 99-13
USD 31.99
2.5'' Inch Stainless Steel V-Band Flange & Clamp Kit for Turbo Exhaust Downpipes
USD 14.29
2" Front Leveling lift kit Fit Chevy Silverado GMC Sierra GM 1500 LM 07-17 Black
USD 17.99
LED Submersible Square Trailer Tail Lights Under 80" Brake Boat Stud Mount
USD 21.00
1PC 2.75" (2.99"-3.31") 301 Stainless Steel T Bolt Clamps Clamp 77mm-85mm
USD 3.46
Picture
New List Item
(1X) 40 SERIES BELT TORQUE CONVERTER GO KART COMET203785A COMET203785 MANCO12346
USD 8.55
3” Front Leveling Lift Kit For 2004 2006 2010 2WD & 4WD 04-17 Ford F150 New
USD 42.77
30 Series 1" Bore Torque Converter Driver Clutch Fit Manco 8190 219554A w/ Belt
USD 29.45
Timing Chain Kit Phaser Oil Water Pump Timing Tool For Ford F150 Lincoln 5.4L
USD 280.99
For 2013-2015 Chevy Malibu LT LTZ Projector Headlight Headlamp Passenger Side
USD 114.89
Fuel&Oil Pressure Mechanical Gauge Test Tool Kit For Ford Powerstroke 6.0L&7.3L
Description:
The set is a tool, primarily designed to test fuel pressure while driving.
The tool can test fuel or low side oil pressure.
The set is essential to see the pressure drop with a load on the engine.
It comes with all the fittings needed for both 6.0 & 7.3 engines.
100% brand new, Never been tried or installed
Professional installation is highly recommended (No instructions included)
Materials:
100 psi liquid filled gauge- (High quality stainless steel body with shatter-resistant rubber casing)
300 PSI rated fuel & oil hose
Lever action suction cup for securing the gauge and easier reading;
Needed JIC fittings/adapters.
Application Details:
To test Fuel pressure on a 6.0, use an allen wrench removing the plug located at the bottom front of the fuel filter housing and then install the 1/4" jic x M12-1.5 adapter.
To test oil pressure on a 6.0, please remove the "single wire", oil pressure sensor, and utilize that port with the 1/4" jic x #4 orb adapter. (Sensor is located on top of the oil cooler housing in front of the turbo)
For 7.3 fuel pressure test, there's 2 plugs on the back of the fuel filter housing. Upper driver side is the pre-filter port. Lower passenger side is the post filter port. (Most people use the pre-filter port because its easier to reach) Then you would install the 1/4" jic x #4 orb adapter.
For 7.3 oil pressure test, you have 2 options. You can remove the "single wire", oil pressure sensor located on top front of engine, and then install the 1/4" jic x #4 orb adapter. Or, you can remove 1/8" npt plug located at the oil filter head and then install the 1/4" jic x 1/8" npt adapter.
This tool may probably work on many other engines, including gas engines. If the engine has a 7/16-20 thread test port at the fuel rail, just remove the shrader valve before connecting the tool.
Notes:
After any fuel pressure test, you may leave the adapter installed and cap it with the provided JIC cap. The JIC plug is used to block off the end of the tool for storage.
Any questions please contact us via eBay and we'd love to help you out.
Package including:
Assembled pressure test hose and gauge set
Needed fittings/adapters
As shown in the Picture
Payment
We accept eBay payment and other payments through eBay payment
Shipping
Items will be shipped within 1 business days after your payment is cleared.
All Customer's items will be shipped from our CA or NJ warehourse
Import duties, taxes and charges are not included in the item price or shipping charges
International orders may take 1~3 weeks to arrive
Returns
You can return your
unused items back for exchange or refund within 60 days
.
Please contact us for return process before you return the item.
Customer service
Please feel free to contact us by ebay message if you have any questions, our customer service will reply within one business day.