ORIGINAL XT-IDE Deluxe - Bootable ISA CF+IDE Interface Card

Description

This is the original XT-IDE Deluxe.
I cannot comment on the quality of the various clones with credit removed and eBay listing copied.
Current stock is Rev1.1, which is identical to Rev1.0, but with an added connector for the Monotech MicroRAM Rev1.1 card. This allows you to fill any 8088 PC's RAM, without using another ISA slot. If you want a MicroRAM card, please see my other listings.
The XT-IDE Deluxe is primarily for adding a reliable, modern hard disk solution to an 8088 PC, such as an IBM 5150 or 5160. It also works in 286 and up, but the Monotech DoubleROM card will provide you better performance in those.
The card provides both a rear-accessible CompactFlash card slot, and an internal IDE port for hard drives or internal CF cards. You can use both at once, with a maximum of two drives total.
This rear-accessible slot allows easy swapping of cards or transfer between vintage PC and modern PC.
CF card not included. Make an offer of extra to include a 64MB card with DOS loaded, or for a 128MB card.
Offer an additional to bundle a USB CF card reader.
Typical uses:
Add IDE HDD or CF card to an 8-bit ISA system such as IBM PC, XT, and clones.
Add IDE support to a system without IDE support in the BIOS (like AT and PS/2).
By default the XT-IDE BIOS comes configured for:
All-CPU-compatible BIOS.
Use the XT-IDE Card's IDE interface at 300h, no IRQ needed.
Boot first hard drive unless user presses A for floppy.
Any of the above can be changed on purchase, or in your own time with the simple DOS utility.
I recommend using the 186 BIOS if you have an 80186 or NEC V20/V30 or higher, for improved disk performance.
Switches and jumpers control:
I/O port for the onboard 8-bit IDE interface
I/O port for the Option ROM
Option ROM Enable
Option ROM Write-protect
Compatibility mode and HiSpeed mode
Provide 5V on IDE pin 20, which can power some DoMs and CF adapters.
IBM XT Slot-8 Support
There are blank PCB pads for an optional power output connector. Useful for powering an IDE HDD in machines such as the PS/2 Model 30, which doesn't have a spare power connector from the power supply.
You can upgrade to the larger 32K EEPROM. This has a boot menu and is only useful if you wish to boot from more than one HDD and Floppy drive at different times. The default 8K EEPROM allows booting from one HDD and one floppy drive (by pressing A). This upgrade is more (make the offer if desired).
The CF slot is set to master by default, as some CF cards don't like being slave. You can change this with a jumper on the CF daughterboard.
Max 2 drives, one as master, one as slave.
So you could have one IDE drive on an IDE cable, and the rear-accessible CF slot populated.
Or you can have just the CF slot, or up to two IDE drives on an IDE cable, with no CF card in the slot.
Schematic has some parts based on XT-IDE Rev2 schematic by VCfed members, and The Glitch Works
---
eBay doesn't allow custom shipping service names.
"Economy"
will be
tracked airmail
to most countries, but untracked to a few more remote ones.
1-2 weeks usually
,
but can take longer.
"Expedited"
will be
DHL Express. 3-4 days usually.
Exact quotes vary depending on the country.
I can refund if you are overcharged.