Pi1541 with Integrated Epyx Fastload Cartridge (PCB for DIY Build)

Description

Professionally Fabricated Printed Circuit Board (PCB) for a DIY build of the very popular combo-cartridge, supporting both a
Pi1541
and
an Epyx Fastloader catridge
This is a tremendous value, with two
super useful
and well integrated content loading solutions, rolled into one!
The Pi1541 Project
enables you to use a Raspberry Pi Zero or Pi Zero-W to emulate a real Commodore disk drive, over your computer's IEC serial port.
> The Pi supports a MicroSD card slot that will hold both the Pi1541 build and folders containing .D64 or .PRG files
> An integrated set of tactile buttons and a nice OLED screen, enables you to conveniently navigate through the content on your SD card
> Compatible with all Commodore 64 and 128 builds and versions
>
https://cbm-pi1541.firebaseapp.com
>
https://cbm-pi1541.firebaseapp.com/Experimental/Pi0/kernel.zip
The Epyx Fastload Cartridge
has a
long
history of being one of the simplest and easy to use fast loading solutions, with a wide range of compatibility across most software titles.
> Includes an integrated machine language monitor, which makes it easy to examine games, demos and other programs that have been loaded
> Includes an integrated disk utility menu with convenient file and disk management tools
>
https://en.wikipedia.org/wiki/Epyx_Fast_Load
>
https://archive.org/download/epyx-fast-load-1984-v-2-roms_202005/Epyx_FastLoad_1984_v2_ROMS.zip
The combination of both capabilities gives you the convenience of mass storage with quick file system navigation, as well as trusted and time-tested fast loader performance.
What's Included Here?
>
The professionally fabricated Printed Circuit Board ONLY!
What Else is Needed?
A complete Bill of Materials with all required electronic components:
1x Raspberry Pi Zero v1.3 (either with or without WiFi)
1x MicroSD Card 16GB (recommended minimum size)
1x 3D Printed Cartridge Housing (
Optional
)
4x Screw: M2.5 @ 10mm
2x Screw: M2.5 @ 12mm
1x OLED Screen @ 0.96", supporting I2C w/4 Pins
1x Logic level converter - 4 Channel bi-directional
1x EPROM IC - W27C512 @ 28 Pins
1x IC Socket - 28 Pin (optional)
1x Logic IC - 74LS07 @ 14 Pins
1x IC Socket - 14 Pin (optional)
1x XH Connector for IEC Cable @ 6 Pin, Right Angle
1x Circular 6 Pin DIN Male Connector
6x Tactical Push button switch, Right Angle
1x Header - Dual row male pins @ 20x2
1x LED - Any color @ 5mm
1x Resistor 470R 1/2 Watt
1x Resistor 2.7K 1/2 Watt
1x Ceramic Capacitor @ 100nf
1x Ceramic Capacitor @ 47uf
Complete build instructions are available here:
>
https://www.pcbway.com/project/shareproject/_DIY__Pi1541___EPYX_FAST_LOAD_CARTRIDGE_for_COMMODORE_64.html