*NEW* Apple II/II+/IIe SDISK II Floppy Disk Emulator PCB ONLY

Description

Acknowledgement
: This board was designed by Nishida Radio.
This board will let you create a floppy disk emulator SDISK II for the Apple II series computers.
YOU
MUST
GATHER YOU OWN PARTS AND MUST KNOW HOW TO SOLDER SAFELY.
WHAT YOU GET
The PCB board only.  The voltage regulator (
Toshiba TA48033S, TA48M033F etc. (3-3.6V regulator whose center pin = GND)
can be hard to get and buying chips from China sellers are not exactly a guaranteed thing.  You might want to find a substitute voltage regulator.  The micro-controller is the ATMEGA328P.  Digikey.com is best place to buy chips! Authentic and decent price.  For the HC125, you can use the HCT125 version as well.  Don't use 74LSxxx series.  Old and hard to find.
I have enough pictures to show you with the right cables.  Just a suggestion and you are free to use or not use and I am not responsible for your choice.  But: Use the 90-degree header pins as a connector with female-to-female Dupont wires long enough to interface with the Apple II's disk controller.  You don't really need female-female cable shown in the last photo.
Information here
: tulip-house.ddo.jp/digital/SDISK2/english.html -- This is where you get the firmware.
SHIPPING
:  I can ship as a letter, which will cost only .   You must ask me for an invoice and tell me that you want to ship as a letter.  Shipping as a letter will NOT have tracking number.  Please accept this risk!
International buyers
:  Please contact me.
IMPORTANT
The board is sold AS IS and ONLY the board.
STANDARD DISCLAIMER: I AM NOT RESPONSIBLE FOR YOUR PROJECT IN ANYWAY, THAT IS, ANY KIND OF DAMAGES TO YOU OR YOUR MACHINE(S)/COMPUTER(S), INCLUDING BUT NOT LIMITED OF TO PHYSICAL, MENTAL, EMOTIONAL, PROPERTY-WISE, OR FINANCIAL DAMAGES FROM YOUR PROJECT(S), NOR AM I RESPONSIBLE FOR ANY TECHNICAL SUPPORT. THIS IS JUST LIKE A BREAD BOARD THAT YOU USE IT WITH YOUR OWN RESPONSIBILITY AND IMAGINATION.
You MUST read and understand all the computer electrical characteristics on its peripherals, e.g., expansion slots, etc., before using the board, e.g., maximum voltage and ampere you can use! Please research that on the internet! You MUST also understand all electrical characteristics of whatever ICs that you want to use with the board. Read the datasheets!
NO returns or refunds. Please note that the descriptions were provided to the best of quality. Not responsible for any typos.
PLEASE ASK QUESTIONS IF YOU'RE IN DOUBT BEFORE BIDDING OR BUYING!
TERMS
Sold AS-IS
No returns for refund  Sorry no technical support, as I have no technical aspects of this item. As mentioned, it's an open source product